C.H.I. Commercial Micro-Grooved Polystyrene Sandwich: 3285

SECTION CONSTRUCTION:

• Features four evenly spaced micro-grooves that run horizontally across each section
• 26-gauge commercial quality steel exterior skin with 27 gauge steel interior
• Tongue-and-Groove section joints
• Concealed steel back-up plates run from top to bottom of each section for secure hardware attachment
• White painted end stiles
• Bottom "U" type astragal is a standard feature

Insulation:

• Polystyrene core secured in place with a urethane adhesive to increase structural integrity
• R value 10.29 (R-value Testing is in accordance with ASTM C518 standards)

26-gauge steel exterior with horizontal micro-grooves

MAXIMUM STANDARD SIZE:

• Max width 28’2” x 20’ high

Colors / Finish:

Optional Colors include RAL powder-coat in 188

Panel Configurations:

• 18", 21" or 24" high by width of door

Model 3285
Door Height	Number of Sections	Door Width	Panels Across
Thru 8'	4	Thru 9'5"	2
8'3" - 10'	5	9'6" - 12'11"	3
10'3" - 12'	6	13' - 16'5"	4
12'3" - 14'	7	16'6" - 20'2"	5
14'3" - 16'	8	20'3" - 24'2"	6
16'3" - 18'	9	24'3" - 26'2"	8
18'3" - 20'	10	26'3" - 28'2"	10

Accents:

• Complete the look of your door with the color and style of Accents.
• Accents Logos is available as an option for interior and exterior applications
• Accents Planks is available as an option in cedar, mahogany, natural oak and dark oak

Track Configuration:

• Tracks are 2' or 3', as specified
• 12" radius, 15" radius
• Normal Headroom, Low Headroom, Vertical Lift, High Lift, Incline
• 20" & 32" radius (2" track & up to 10' high doors only)

Mounting Options:

• Bracket Mount (leg out), Clip Angle Track, Continuous Angle Track

Track Gauge:

• 2" Tracks - up to 8'-0" high = 17 gauge roll-formed galvanized steel
• 2" Tracks - 8'-0" 10'-0" = 16 gauge
• 2" Tracks - over 10'-0" = 14 gauge
• 3" Tracks - 12 gauge

Counterbalance System (Springs)

• Oil tempered torsion springs are mounted on a cross-header shaft supported by galvanized steel ball breaking end plates and center bracket(s)

• Springs are calculated for exact door weight, size and trajectory in accordance with ANSI 102 standards for a minimum of 10,000 cycles

  NOTE: May be specified for higher cycles when available

• Counterbalance is transferred through galvanized aircraft quality cables secured to bottom of the door

Operation:

• Manual Operation
• Motor Operation: Trolley or Jackshaft
• Chain Hoist Operation

Optional Lites / Windows

• 24" x 6", 24" x 12", or 34"x 16" lites with 1" insulated glass (Clear, Tempered or Tinted)

• Optional Aluminum Full View Frame to match size and panel layout of steel section

  (Optional open for field glazing, 1/8" DSB, 1/8" polycarbonate, 1/8" tempered glass, 1/4" tempered glass, 1/2" insulated glass or 1/2" tempered insulated)

• Special glass options available. Contact factory for details.

Doors are available with a variety of Specialty Options for specific installation needs. Contact Factory for additional options.

Swing-Up Sectional Post

A perfect answer for openings that are too large for a single overhead door that must accommodate large machinery or equipment on an infrequent basis. Operating on a single pivot point that is designed to swing left or right, it allows the use of one (1) smaller door for everyday requirements and the full opening when needed. See video.

Pass Doors

Whether it's for convenience or necessity, there are circumstances where a pass-through door is requested to provide ingress and egress in an overhead door enclosed opening without having to open the overhead door. C.H.I. can accommodate this need with a state-of-the-art design pass-door option. Available in our urethane core models 3216 and 3212, it’s the ideal choice to solve this need.

Header & Jamb Seals

Seal the perimeter of the opening to provide additional air infiltration and thermal protection.

Wind can be unpredictable and destructive. This is why C.H.I. Windbreaker Series and iSeries doors are designed, tested, and built to the most rugged specifications. Wind chamber tested to ensure windload resistance, these extra-sturdy designs provide enhanced defense against the elements.

C.H.I. Overhead Doors developed the resilient Windbreaker Series garage doors to protect against high wind conditions. The super-resilient C.H.I. iSeries Impact Approved doors have strength designed to withstand direct collision of projectiles and other windborne debris at high speeds.

Additional Windload Information:

Navigating the complex windload codes and compliances can be a daunting task. C.H.I. sales associated and distributors are able to help you understand the specific codes governing your geographic area. For additional information, these websites offer a great deal of information.

Technical Data Sheets:

• TDS #168 - Wind Loads on Garage Doors - FAQ
• TDS #177 - Application of Kd Factor To Garage Door Wind Load Determination Using ASCE 7
• TDS #178 -Garage Door Wind Load Determination - Effective Wind Area
• TDS #180 - Wind Load Ratings for Non-Tested Garage Door and Rolling Door Sizes
• TDS #181 -General Code Inspection Guidelines For Wind Load Rated Garage Doors

• 3 Part Specification CSI (PDF)
• Model 3285 Spec Data Sheet
• BIM Download: Micro-Grooved

Section Resources

• Door Width/Panels Across Chart
• Door Height/Number of Sections Chart

Track Resources

• Standard Lift Doors
• Low Headroom: Front Mount
• Low Headroom: Rear Mount
• High Lift Doors
• Vertical Lift Doors
• Reverse Angle Track: Leg In (Steel Jambs Shown)
• Bracket Mounted Track Angle Mounted Track: Leg out (Wood Jambs Shown)